Call us on 01983 825 463

Store hours - Weekdays: 7.30am - 5.00pm / Saturdays: 8.30 - 12.00noon

Flat Roofing

  • Danopol HSF 1.5 Anthracite is a synthetic PVC plasticized membrane, reinforced with polyester net carrier, and a 300gsm geotextile fleece backing. It has an overlap without geotextile of 6 cm, on the right longitudinal zone, allowing overlaying and welding to the adjacent sheet. Designed for flat roof waterproofing, U.V. resistant. Features & Benefits:
    • Tried and tested, versatile waterproofing
    • Excellent flexibility and resistance to tearing
    • High dimensional stability, tensile strength & puncture resistance
    • Very good resistance to micro-organisms, putrefaction, mechanical impact, root penetration, natural ageing, weathering and UV radiation
    • Complies with EN 13956; EN 13967; EN 13361; EN 13491.EN 13362
    • Has Environmental Product Declaration EPD No.S-P-00691
    • Mechanical fixing systems are BBA Certified (No. 14/5118) and carry European Technical Approval (ETA) (No. 10/0054)
    Danopol Logo
  • Esterdan Plus 30 P Elast is a torch-applied bituminous roofing underlay offering long-lasting waterproofing protection. The membrane incorporates a tough polyester reinforcement, and is covered on both sides with SBS modified bitumen. Both the upper and lower sides of the membrane are finished with a polyethylene film. Features & Benefits:
    • Total impermeability to water and water vapour
    • Excellent tear resistance
    • High resistance to static and dynamic loads
    • Great resistance to traction and elongation at break
    • Long-term stability
    • Easy to apply to the substrate
    • Self-healing characteristics
    Dimensions: 12m x 1m Danopol Logo
  • Esterdan Plus 50 GP Elast is a torch-applied bituminous roofing cap sheet offering long-lasting waterproofing protection. The membrane incorporates a tough polyester reinforcement, and is covered on both sides with SBS modified bitumen. The upper side of the sheet is protected with a UV resistant black mineral surface, whilst the lower surface features an anti-adhesive polyethylene film. Features & Benefits:
    • Robust 5.0 kg/m2 roofing membrane
    • Total impermeability to water and water vapour
    • UV protection provided by the mineral chipping finish
    • Excellent resistance to tearing
    • Excellent resistance to traction and elongation at break
    • High resistance to static and dynamic punching
    • Long term stability
    • Simple torch-on application
    Dimensions: 8m x 1m Colour: Black Danopol Logo
  • Hertalan easy cover is an EPDM membrane roofing system which can provide every flat roof with the best EPDM waterproof sheeting. Our special hot bonding technique is used to connect EPDM sheets together at our factory, this way HERTALAN® produces a EPDM flat roofing system that can virtually seal an entire roof at once, using large sheets. There are big advantages to working with an EPDM membranes. The number of seams and accordingly risks are kept to an absolute minimum. Far fewer actions on the roof are required, which makes each roof structure waterproof more quickly and effectively either as a partially/fully adhered, mechanically fixed or ballasted system process. Hertalan easy cover EPDM membranes have excellent properties and are suitable for exposure to UV and ozone radiation without ageing and therefore can be used as adhered and mechanically fixed systems without the requirement for additional surface protection. Features & Benefits:
    • Long service life: over 50 years for the system (SKZ study 2001)
    • Environmentally friendly & ecologically responsible
    • Suitable for any traditional flat roofing system
    • Suitable for green roofing systems (FLL approved)
    • BBA Certified
    • Lightweight: approximately 1,23 kg/m²/mm
    • Bitumen and root penetration resistant
    • UV resistant hot air weldable EW strip
    • Permanent elasticity
    • Rapid, safe application without naked flame
    • Minimal maintenance
    • AA fire rated system
    Stocked Items - 1.4m, 2.4m and 4.2m wide rolls cut to the meter We also stock a range of accessory products ideal for use with Hertalan EPDM membranes: Hertalan KS96 Sealant A high quality MS Polymer adhesive sealant specially developed for adhering Hertalan EPDM sheets and accessories both vertically and horizontally to timber, bitumen, concrete, EPDM and metalwork etc. and membrane jointing.
    • Coverage approx. 7 linear metres per 290ml cartridge (pea sized bead).
    Hertalan KS137 Contact Adhesive A ready-for-use contact adhesive which has been developed specially for adhering Hertalan EPDM membranes both vertically and horizontally onto surfaces such as wood, bitumen, masonry material, lead and suitable faced rigid thermal insulation boards, etc..
    • Coverage approx. 1,9 m² per 0.9 kg container
    Hertalan KS217 Adhesive A ready-made, water-based bonding adhesive for use on absorbent substrates, such as wood or spruce plywood, OSB and tissue faced insulation boards. Specifically developed for the adherence of the Hertalan EPDM roofing systems on horizontal, absorbent substrates.
    • Coverage approx. 20 m² per 5 kg container
    Hertalan Roof Drain: Rainwater Outlet A 400mm PE pipe with an EPDM flange
    • Available in 90 and 45 degrees angles
    • Flange size is between 300 - 400 mm
    • Ideal for use with Hertalan Easy Cover
    Hertalan Flashing Uncured and mouldable EPDM. For use on non standard details. Unreinforced unvulcanised EPDM rubber which is plastically deformable and vulcanises in the open air.
    • For use in interior and exterior corners where standard pre-formed corners are not suitable.
    • Roll width 300 mm and 2.5 mtr. length.
    • Ideal for use with Hertalan Easy Cover
    Hertalan EPDM Internal & External Corners Pre-fabricated internal and external EPDM corners.
    • Internal corners 200x200x300 mm
    • External corners 300x300x150 mm
    • Skylight corners (45º) 180x150x150 mm
    • Ideal for use with Hertalan Easy Cover
    • Also suitable for DPC systems (EPDM strips and lead alternative)
    Hertalan Logo
  • Quicktrim is Plytech’s own high-quality, environmentally friendly roof edge detail that takes half the time to install and maintains a long life of high performance. It is ideal for use with Hertalan, Resitrix and other flat roofing membranes. Features & Benefits:
    • Speed & ease of use
      • Flat roof trims don’t need to be laborious thanks to Quicktrim. Quicktrim is a doddle to install, and thanks to its light and strong material it is incredibly versatile. Our roof edge trims fit any waterproof roofing membrane, and include ready-made corners and prepared 2.5m lengths. With Drip (gutter) Trims and raised edge Check Kerb Trims, Quicktrim comes with all the accessories you require for a simple installation.
    • Unique Design
      • Quicktrim has been tried and tested since 1999 and provides a secure flat roof perimeter detailing that will enahance the look of any commercial or residential property.
    • Cost-effective
      • While Quicktrim competes with other roof edge detail products in its price range, low installation costs and minimal maintenance make it the ideal flat roof trim solution while saving further expenditure as time goes on.
    • Environmentally friendly
      • Quicktrim is manufactured using recycled polystyrene, a material made up of non-biodegradable waste, and it therefore alleviates many environmental and cost issues relating to disposal.
    Plytech QuickTrim logo
  • When it comes to flat roof replacements, the GRP Roof 1010 System offers unrivalled performance at exceptional value and a genuinely long-lasting solution. Specially formulated to provide durable waterproof protection, GRP Roof 1010 has been developed by the leading polyester chemists at Res-Tec specifically for the purpose of flat roofing – unlike many other GRP roofing products. Every batch is made to a rigorous specification for consistent high quality roofing performance. The System consists of GRP Roof 1010 Base Coat Resin and Chopped Strand (CSM) Fibreglass Reinforcement Roll / Taping Mat applied insitu over a good quality OSB3 deck. The roof is finished with pre formed GRP edge trims and a GRP 1010 Top Coat. The system is LABC approved for ensured compliance with building regulations, fully fire tested and supported by a 20 year materials guarantee. GRP Roof 1010 is available to buy from a wide range of stockists across the UK and Ireland. Features & Benefits:
    • Installations supported by Res-Tec’s trusted 20 year materials guarantee
    • Simple and quick installation with a waterproof finish that is proven to last
    • Fire tested to BS 476-3:2004 with an BROOF(t4) and F.AB result meaning unrestricted use under Building Regulations
    • Attractive finish to complement any home
    • Anti-slip finish available for balconies and walkways
    • Cold applied for maximum safety – no risks from open flames and other hot works
    • Suitable for application in temperatures as low as 5°C or as high as 30°C
    • Totally seamless membrane – no joints, no welds, no weak points
    • Manufactured to ISO 9001 and ISO 14001 standards for consistent quality
    Res-Tec Logo
  • There is simply no other roofing system capable of delivering a total waterproofing solution across such a wide range of flat roof repair and flat roof coating applications. Similar to fibreglass systems, Flexitec 2020 uses a powder hardener for rapid curing and is reinforced with fibreglass CSM for extra strength and crack-resistance. The finished membrane is also extremely tough, impact resistant and can easily accommodate foot traffic. Due to its unique flexible technology, Flexitec 2020 is able to coat all common roof surfaces such as felt, concrete, asphalt, GRP and timber – meaning roofs can be overlaid without the need for strip and replace works. No matter the size, shape or complexity of the roof, Flexitec 2020 provides a seamless, tough and flexible membrane to any roof or balcony area. Features & Benefits:
    • Rapid-curing (30-60mins walk-over time) with an extra-tough finish
    • Similar to liquid overlay systems it’s flexible and can coat a range of roof surfaces
    • Can be applied to almost any roof surfaces including felt, asphalt, concrete, GRP, PVC single-ply, metal details and approved insulation boards
    • Single resin system that can be repaired / overcoated without grinding down
    • Fire tested to BS 476-3 Rating: F.AA and EN 13501-5(4) Rating: BROOF(t4) – the highest rating a flat roof system can achieve and allowing for unrestricted use under UK regs.
    • LABC Registered Detail certified (Certificate No.EW1000), ensuring compliance with the latest building regulations.
    • Can be applied as a one coat (10 year repair system) or two coat (20 year roofing system) system
    • Highly flexible and suitable for any size or shape roof without the need for expansion joints
    • Extremely rapid installation with walk-on times of 30-60 minutes
    • Incorporates 225 g/m2 fibreglass CSM for extra tough membrane that lasts decades
    • Installations by trained installers of the two-coat system are supported by Res-Tec’s trusted 20 year materials guarantee
    • Anti-slip finish available for balconies and walkways
    • Cold applied for maximum safety – no risks from open flames and other hot works
    • Suitable for application in temperatures as low as 1°C (with winter accelerator) or as high as 30°C
    • Totally seamless membrane – no joints, no welds, no weak points
    • Manufactured to ISO 9001 and ISO 14001 standards for consistent quality
    Res-Tec Logo
  • RESITRIX® SK W is a fully self-adhesive, hot air-weldable and root-resistant EPDM waterproofing membrane with a synthetic rubber (EPDM) base and a glass fabric liner. The underside has a self-adhesive, polymer-modified layer of bitumen that is protected by a detachable release film. RESITRIX® SK W Full Bond has FLL test certification and approval according to DIN EN 13948. It is therefore particularly suited to full-surface bonding and all types of green roof too. RESITRIX® SK W is also suitable for infiltration-proof waterproofing in the building waterproofing sector. Features & Benefits:
    • Certified service life of more than 50 years and also named the only product of its kind for joining seams (according to a study conducted by the German Plastics Centre)
    • Simple and safe installation without any need for naked flames
    • 100% leak-tight welded seam – simple visual inspection
    • Sustainable (EPD-certified and DGNB-compliant)
    Laying Related Benefits:
    • Simple and safe laying without any need for naked flames
    • 100% leak-tight welded seam – simple visual inspection
    • Fully self-adhesive system
    • The entire underside of the EPDM membrane can be welded
    • Non-slip surface, even when wet
    • No additional measures required for the T-joint area
    • Can be welded with hot air down to -10°C
    Colours Available - Black We also stock a Primer FG35, and ideal accessory for use with Resitrix membranes: FG 35 is a solvent containing primer based on synthetic rubber and resins. FG 35 surface primer is used in combination with self-adhesive RESITRIX® EPDM waterproofing membranes on a wide variety of substrates. Applications: For priming substrate surfaces for self-adhesive RESITRIX® waterproofing membranes on:
    • Metallic substrates, uncoated
    • Bituminous materials
    • Wooden materials
    • Timber/timber materials
    • Plastics
    • Insulation boards (apart from unfaced EPS foam boards)
    Stocked Items - 4.5kg and 12.5kg cans Resitrix logo

Title

Go to Top