Hertalan easy cover is an EPDM membrane roofing system which can provide every flat roof with the best EPDM waterproof sheeting. Our special hot bonding technique is used to connect EPDM sheets together at our factory, this way HERTALAN® produces a EPDM flat roofing system that can virtually seal an entire roof at once, using large sheets.
There are big advantages to working with an EPDM membranes. The number of seams and accordingly risks are kept to an absolute minimum. Far fewer actions on the roof are required, which makes each roof structure waterproof more quickly and effectively either as a partially/fully adhered, mechanically fixed or ballasted system process.
Hertalan easy cover EPDM membranes have excellent properties and are suitable for exposure to UV and ozone radiation without ageing and therefore can be used as adhered and mechanically fixed systems without the requirement for additional surface protection.
Features & Benefits:
- Long service life: over 50 years for the system (SKZ study 2001)
- Environmentally friendly & ecologically responsible
- Suitable for any traditional flat roofing system
- Suitable for green roofing systems (FLL approved)
- BBA Certified
- Lightweight: approximately 1,23 kg/m²/mm
- Bitumen and root penetration resistant
- UV resistant hot air weldable EW strip
- Permanent elasticity
- Rapid, safe application without naked flame
- Minimal maintenance
- AA fire rated system
Stocked Items – 1.4m, 2.4m and 4.2m wide rolls cut to the meter
We also stock a range of accessory products ideal for use with Hertalan EPDM membranes:
Hertalan KS96 Sealant
A high quality MS Polymer adhesive sealant specially developed for adhering Hertalan EPDM sheets and accessories both vertically and horizontally to timber, bitumen, concrete, EPDM and metalwork etc. and membrane jointing.
- Coverage approx. 7 linear metres per 290ml cartridge (pea sized bead).
Hertalan KS137 Contact Adhesive
A ready-for-use contact adhesive which has been developed specially for adhering Hertalan EPDM membranes both vertically and horizontally onto surfaces such as wood, bitumen, masonry material, lead and suitable faced rigid thermal insulation boards, etc..
- Coverage approx. 1,9 m² per 0.9 kg container
Hertalan KS217 Adhesive
A ready-made, water-based bonding adhesive for use on absorbent substrates, such as wood or spruce plywood, OSB and tissue faced insulation boards. Specifically developed for the adherence of the Hertalan EPDM roofing systems on horizontal, absorbent substrates.
- Coverage approx. 20 m² per 5 kg container
Hertalan Roof Drain: Rainwater Outlet
A 400mm PE pipe with an EPDM flange
- Available in 90 and 45 degrees angles
- Flange size is between 300 – 400 mm
- Ideal for use with Hertalan Easy Cover
Hertalan Flashing
Uncured and mouldable EPDM. For use on non standard details. Unreinforced unvulcanised EPDM rubber which is plastically deformable and vulcanises in the open air.
- For use in interior and exterior corners where standard pre-formed corners are not suitable.
- Roll width 300 mm and 2.5 mtr. length.
- Ideal for use with Hertalan Easy Cover
Hertalan EPDM Internal & External Corners
Pre-fabricated internal and external EPDM corners.
- Internal corners 200x200x300 mm
- External corners 300x300x150 mm
- Skylight corners (45º) 180x150x150 mm
- Ideal for use with Hertalan Easy Cover
- Also suitable for DPC systems (EPDM strips and lead alternative)
Reviews
There are no reviews yet.